Handleiding
Je bekijkt pagina 36 van 43
Troubleshooting
Troubleshooting
Should an error occur, first check the following points. If the distortion is still not eliminat ed,
the monitor should, if possible, be checked on another computer.
If you cannot solve the problem, please contact our Service Desk.
Having this problem? Check the following points:
No screen display
Power indicator does not light up
► Check whether the power cable on the
monitor is connected correctly.
► Check whether the comput
er is switched on.
No screen display
Power indicator is lit
► Check whether the compute r is switched o n.
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the comp uter.
► Press any key on the computer keyboard.
The compute r may be in power saving
mode.
► Alter the brightness and/or contrast until you
get a picture.
Message: No Signal
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the comp uter.
► Check whether the compute r is switched o n.
Message:
Frequency out of range:
##kHz/##Hz
Please change the display mode to
1920 x 1200 with 60 Hz
The input sign
al (horizontal frequency and
refresh rate
) at th e displayed input does not
correspond t
o the technical data for the monitor.
► Adjust the v
ideo frequency range using
the comp ute
r software (refer to the
documentat
ion for the computer or graphics
card).
► Select a valid screen resolution using
the comp uter software (refer to the
documentation for the computer or graphics
card).
Picture position not correct
The monitor recognises an undefined mode (see
chapter "
Technical specification", Page 35).
► Press the
AUTO
button to conduct the
auto-adjustment of the screen.
Picture is shaking
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the comp uter.
► Press the
AUTO
button to conduct the
auto-adjustment of the screen.
Picture is wrongly adjusted
► Run
the Factory Recall function in the OSD
me
nu.
The Auto Processing me ssage appears.
32 Fujitsu
Bekijk gratis de handleiding van Fujitsu B24W-7 LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fujitsu |
| Model | B24W-7 LED |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2795 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Jaarlijks energieverbruik | 28 kWu |
| Gewicht verpakking | 8400 g |
| Energie-efficiëntieklasse (oud) | A+ |
| Aan/uitschakelaar | Ja |
