Fuji Electric ASF7MI-KG handleiding
Handleiding
Je bekijkt pagina 13 van 16
En-12
Step 2. User registration
1. Open the installed mobile app.
2. Register the user (with either a smartphone or tablet PC)
by following the instructions in the create an account
section of the mobile app.
Step 3. Installing WLAN adapter
CAUTION
• Be sure to turn o the power supply of the air
conditioner when installing or removing this product
to avoid the risk of electric shock.
• Do not put ngers, sticks etc. in the connection part of
this product and the connection slot of the indoor unit.
Otherwise, electric shock or damage to the product
may occur.
• Do not standing on an unstable platform when
installing or removing this product to avoid injury.
1. Be sure to turn air conditioner o and to disconnect all the
power supply.
2. Open the intake grille.
3. Open the WLAN adapter cover until it snaps.
4. Plug the WLAN adapter into the connection slot of the indoor
unit in the direction as shown in the gure.
Label side
5. Close the WLAN adapter cover and the intake grille.
Step 4. Air conditioner registration (pairing of WLAN
adapter)
NOTES:
• Before starting this setting, reconnect the power supply of the air
conditioner and wait for 60 seconds or more.
• Check that the smartphone or tablet PC is linked to the access point
you are connecting the air conditioner. The setting will not work if it
is not connected to the same access point.
• To control 2 or more air conditioners with the same smartphone or
tablet PC, repeat the setup of the chosen mode.
)
Register the air conditioner by following the instructions on
the mobile app.
This operation manual describes only the setting procedure of the
remote controller.
When the registration is completed, [
] indicator on the indoor unit
will turn on.
<Manual connection>
Setting procedure of the remote controller
NOTE:
If you do not press any buttons of the remote controller for 60
seconds, the remote controller display will return to the original
display.
1. Press
on the remote controller until
only the clock is displayed on the remote
controller display.
2. Press and hold
on the remote
controller for more than 5 seconds.
will be displayed on the remote controller
display.
3. Press
.
4. Select
using .
5. Press
.
The indoor unit enters Manual connection mode
and [
] indicator on the indoor unit will blink.
NOTE: If the registration is not be nished in several minutes,
Manual connection mode is canceled and [
] indicator
turns o.
In this case, repeat the remote controller setting.
<Easy connection>
Setting procedure of the remote controller
NOTE:
If you do not press any buttons of the remote controller for 60
seconds, the remote controller display will return to the original
display.
1. Press
on the remote controller until
only the clock is displayed on the remote
controller display.
2. Press and hold
on the remote
controller for more than 5 seconds.
will be displayed on the remote controller
display.
3. Press
.
4. Select
using .
5. Press
.
The indoor unit enters Easy connection mode and
[
]
indicator on the indoor unit will blink (on/
o = 1 s/1 s).
When the WLAN adapter nd a connectable WLAN access point,
the blinking will become slowly (on/o = 2 s/0.5 s).
NOTE: If the connection to the access point is not be nished in
several minutes, Easy connection mode is canceled and
[
] indicator turns o.
In this case, repeat the remote controller setting.
For reference
9387602296-01_OM.indb 129387602296-01_OM.indb 12 17-Feb-22 14:56:0817-Feb-22 14:56:08
Bekijk gratis de handleiding van Fuji Electric ASF7MI-KG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fuji Electric |
| Model | ASF7MI-KG |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2914 MB |
