Handleiding
Je bekijkt pagina 25 van 56
25
EN
5. Cleaning and maintenance
5.1. Important information
Carry out cleaning and maintenance as indicated. This extends the life of the appliance and will keep it working properly.
WARNING!
ELECTROCUTION HAZARD DUE TO SHORT CIRCUIT.
• Before cleaning and maintenance, turn off the appliance with the power button and remove the plug from the socket.
Ensure that the plug is not accidentally plugged into the socket during the activities.
• Never spray the appliance and make sure no water gets into it.
• Cleaning and user maintenance must not be carried out by children without supervision.
11
NOTICE!
• Risk of damage to the appliance. Never use aggressive cleaning agents, white spirit, detergents, impregnated wipes or
other cleaning solutions. These can damage the housing and appliance.
5.2. Cleaning the housing
1. Turn the fan speed dial to 0 to turn the appliance off.
2. Remove the mains plug from the socket.
3. Use a soft damp cloth to wipe the housing.
4. Then wipe the appliance dry with a soft cloth.
5.3. Thorough cleaning
Depending on the degree of use and the operating environment, dust and other dirt may have ended up in the air inlet and
outlet. In this case, more thorough cleaning is required.
1. Turn the fan speed dial to 0 to turn the appliance off.
2. Remove the mains plug from the socket.
3. Loosen the screw from the guard with a screwdriver.
4. Turn the front guard clockwise to release the front guard from the rear guard.
5. Hold the fan blade and loosen the blade nut clockwise from the fan motor shaft.
6. Remove the blade nut and fan blade from the fan shaft.
7. Use a soft damp cloth to wipe the fan blade and guards.
8. Then wipe the fan blade and guards dry with a soft cloth.
9. Follow the steps in the 3.3.Installing the appliance section to reassemble the appliance.
6. Faults and solutions
PROBLEM CAUSE SOLUTION
The appliance will not start when the
fan speed dial is turned to 1, 2 or 3.
The appliance is not powered. Check that the plug is in the socket and
that the cable or plug is not damaged.
Check that the RCD is switched on.
Check that there is no power failure.
A fuse has blown in the meter cabinet. 1. Remove the appliance’s plug
from the socket.
2. Check the fuses in the meter box.
If the problem persists, contact
Customer Service.
A bad smell comes out of the
appliance.
The fan blade and/or guards are dusty
or dirty.
Clean the appliance according to
the instructions in 5.Cleaning and
maintenance.
The appliance makes a noise. The surface on which the appliance is
placed is not firm, flat or horizontal.
Move the appliance to a place with a
firm, flat and horizontal surface.
Bekijk gratis de handleiding van Fuave TTV52W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fuave |
| Model | TTV52W |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5445 MB |
