Frilec BERLINUWSP2-46-012 handleiding
Handleiding
Je bekijkt pagina 28 van 47
Troubleshooting
The appliance makes lots
of noise?
Please adjust the front foot, keep the appliance
level.
Please some space between the appliance and the
back or adjacent
walls.
Liquid flowing sound
inside the cabinet?
It is normal because of the refrigerant working
inside.
The appliance does not
start?
Make sure the appliance is connected to the power
properly.
Make sure to switch on the power.
The compressor re-starts after 5 minutes after a
power cut.
Compressor runs
continuously?
If no cold is being produced, call the after-sale
service.
Door does not seal
tightly?
After long time use, the door seal might get stiff &
distorted partially.
1. Heat the door seal with hot-wind blower or hot
towel.
2. The door seal will soften and then close the
door.
The appliance does not
cool sufficiently?
Please adjust temperature setting.
Keep appliance out of sunlight or away from heat.
Please do not open the door frequently.
Unpleasant smells inside
cabinet?
A little bit plastic smell in a newly-bought appliance
is normal and will disappear after a short time.
Clean the compartment and ventilate it for a few
hours.
Condensation on the
glass door?
Please do not open the door frequently or for a
long time.
Please do not set the temperature too low.
High ambient temperature and humidity can cause
condensat
ion
.
The light is not working? Check the power supply first.
Call the retailer’s after-sale service if the light is
broken.
BERLINUWSP2-46-012 Version 5-2025 Page 11
Bekijk gratis de handleiding van Frilec BERLINUWSP2-46-012, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frilec |
| Model | BERLINUWSP2-46-012 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6292 MB |
