Frigor OP700S handleiding
Handleiding
Je bekijkt pagina 77 van 80
WARNING!
• If overow occurs, turn o the main water supply before calling for service.
If there is water in the base pan
If there is an error code that cannot be solved, please call for service.
Do not ll detergent into the dispenser until you are ready to start the dishwasher.
If there is a malfunction the dishwasher will display an error code. The following
table shows possible error codes and their causes.
Error codes:
E1 Longer inlet time. Faucet is not opened, water intake is,
reduced, or water pressure is too low.
E3 Not reaching required temperature. Malfunction of heating element.
E4 Overow. Some element of the dishwasher leaks.
Ed Fault in communication between
main circuit board and display
circuit board.
Open circuit or short circuit between main
and display circuit boards
Codes: Meanings: Possible causes:
A forgotten dish can be added any time before the detergent dispenser opens.
If this is the case, follow the instructions below:
1. Press the Start/Pause button.
2. Wait 5 seconds for the spraying arms to stop before you open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button again and the dishwasher starts after 10 seconds.
Forgot To Add A Dish?:
Efter 5 sek
OP700HV&S
Version: 06-2024 77
Bekijk gratis de handleiding van Frigor OP700S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigor |
| Model | OP700S |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6672 MB |
