Frigor OP700S handleiding
Handleiding
Je bekijkt pagina 73 van 80
Filling The Rinse Aid Reservoir:
To achieve a better drying performance with limited rinse aid, the dishwasher
is designed to adjust the consumption manually by the user. Follow the steps
below.
1. Open the door, switch on the appliance.
2. Within 60 seconds after the appliance was switched on press and hold the
Program button for more than 5 seconds, and then press the Delay button to
enter the rinse aid setting mode.
3. Press the Program button again to select the proper setting according to your
preference. The setting will change in the following sequence: d1->d2->d3-
>d4->. The higher the number, the more rinse aid the dishwasher uses.
4. Wait for 5 seconds or press the Power button to complete the setup and exit
the setting mode.
Adjusting the rinse aid reservoir:
1. Remove the rinse reservoir cap by lifting up the handle.
2. Pour the rinse aid into the dispenser, being careful not to overll it.
3. Close the reservoir cap again.
1. 2. 3.
OP700HV&S
Version: 06-2024 73
Bekijk gratis de handleiding van Frigor OP700S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigor |
| Model | OP700S |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6672 MB |
