Frigor OP700S handleiding
Handleiding
Je bekijkt pagina 57 van 80
Step 2. Dishwasher installation steps:
1. Ax the condensation strip under the work surface of cabinet. Please ensure
the condensation strip is ush with edge of work surface.
2. Connect the inlet hose to the cold water supply.
3. Connect the drain hose.
4. Connect the power cord.
5. Place the dishwasher into the cabinet.
6. Level the dishwasher. The rear foot can be adjusted from the front of the
dishwasher by turning the Philips screw in the middle of the base of dishwasher
with a suitable Philips screw driver. To adjust the front feet, use a at screw driver
and turn the front feet until the dishwasher is level (See Step 3 below).
7. The dishwasher must be secured in place. There are two ways to do this:
A. Wooden or laminate worktop (etc.): Put the installation hook into the slot of
the side plane and secure it to the work surface with the screws (Fig. A).
B. Marble or granite worktop (etc.): Fix the side with screws (Fig. B).
Please refer to the specic installation steps in the installation drawings.
A.
B.
OP700HV&S
Version: 06-2024 57
Bekijk gratis de handleiding van Frigor OP700S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigor |
| Model | OP700S |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6672 MB |
