Frigor OP700S handleiding
Handleiding
Je bekijkt pagina 54 van 80
Water Supply And Drainage:
Cold water connection:
Connect the cold water supply hose to a threaded 3/4” (inch) connector and
make sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time,
let the water run to make sure that the water is clear. This precaution is needed to
avoid the risk of the water inlet being blocked which could damage the appliance.
How to connect the aquastop supply hose:
1. Pull the aquastop supply hose out from the storage compartment located at
rear of the dishwasher.
2. Tighten the screws of the aquastop supply hose to the faucet with a threaded
3/4” (inch) connector.
3. Turn the water fully on before starting the dishwasher.
How to connect the aquastop supply hose:
1. Turn o the water.
2. Unscrew the aquastop supply hose from the faucet. (Use a pan to gather the
water)
Aquastop supply hose:
The aquastop supply hose ensures that the water supply is automatically cut o
if the water ow unexpectedly increases; for example if the supply hose breaks.
This guarantees that water does not keep pouring out in case of major leakages.
Ordinary supply hose Aquastop supply hose
OP700HV&S
Version: 06-2024 54
Bekijk gratis de handleiding van Frigor OP700S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigor |
| Model | OP700S |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6672 MB |
