Handleiding
Je bekijkt pagina 48 van 68
Installing the Bracket:
Before installation, insert the brackets into the slots on all four sides of the
induction hob. Install 2 brackets on each side for a total of 8 brackets.
Caution!
1. The induction hob must be installed by qualied personnel or a technician.
Never attempt to do it yourself.
2. Do not install the hob directly above a dishwasher, refrigerator, freezer, washing
machine or tumble dryer, as the moisture may damage the electronics in the hob.
3. To increase the reliability of the hob it must be installed in a way that ensures
sucient heat radiation.
4. The wall behind the hob and the table surface around it must be able to
withstand heat.
5. To avoid any damage, adhesives used in the surrounding cabinets and table
surfaces must be resistant to heat.
6. Do not use a steam cleaner on the hob.
Connecting the Hob to the Mains Power Supply:
This hob must only be connected to the mains by a suitably qualied electrician.
Before connecting the hob to the mains, check that:
1. The domestic power supply is rated for the power consumed by the hob.
2. The voltage corresponds to the value indicated on the rating plate of the hob.
3. The power supply cables can withstand the load indicated on the rating plate of the hob.
Do not use adapters, reducers or branching devices to connect the hob to the
mains, as they may cause overheating and result in re.
The mains cable must not touch any hot parts and must be routed so that its
temperature does not exceed 75 °C at any point.
IPF800
Version: 06-2024 48
Bekijk gratis de handleiding van Frigor IPF800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigor |
| Model | IPF800 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5346 MB |