Frigor IOP730 handleiding
Handleiding
Je bekijkt pagina 75 van 78
WARNING!
• If overow occurs, turn o the main water supply before calling for service.
If there is water in the base pan
If there is an error code that cannot be solved, please call for service.
Do not ll detergent into the dispenser until you are ready to start the dishwasher.
If there is a malfunction the dishwasher will display an error code. The following
table shows possible error codes and their causes.
Error codes:
E1 Longer inlet time. Faucet is not opened, water intake is,
reduced, or water pressure is too low.
E3 Not reaching required temperature. Malfunction of heating element.
E4 Overow. Some element of the dishwasher leaks.
E8 Fault in distributary valve. Open circuit or short circuit in distributary
valve.
Ed Fault in communication between
main circuit board and display
circuit board.
Open circuit or short circuit between main
and display circuit boards
Codes: Meanings: Possible causes:
A forgotten dish can be added any time before the detergent dispenser opens.
If this is the case, follow the instructions below:
1. Open the door a little to stop the washing cycle.
2. After the spray arms stop rotating, you can open the door completely.
3. Add the forgotten dishes.
4. Close the door.
5. The dishwasher will automatically continue the washing cycle.
Forgot To Add A Dish?:
IOP730
Version: 06-2024 75
Bekijk gratis de handleiding van Frigor IOP730, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigor |
| Model | IOP730 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6676 MB |
