Frigor IOP730 handleiding
Handleiding
Je bekijkt pagina 46 van 78
Please follow the steps below for adding dishwasher salt:
• The salt container must only be relled when the salt warning light ( ) in
the control panel comes on. Depending on how well the salt dissolves, the salt
warning light may still be on even though the salt container has been lled.
If there is no salt warning light in the control panel (for some models), you can
estimate when to ll the salt into the softener by the cycles that the dishwasher
has run.
• If salt was spilled, run a soak or quick program to remove it.
Note:
1. Remove the lower basket and unscrew the reservoir cap.
2. Place the end of the funnel (if supplied) into the hole and pour in about 1.5 kg
of dishwasher salt.
3. Fill the salt container to its maximum limit with water. It is normal for a small
amount of water to spill out at the top of the salt container.
4. After lling the salt container, screw back the reservoir cap tightly.
5. The salt warning light ( ) will turn o after the salt container has been lled
with salt.
6. Immediately after lling the salt into the salt container, a washing program
should be started (We suggest to use a short program). Otherwise the lter
system, pump or other important parts of the machine may be damaged by salty
water. This is out of warranty.
IOP730
Version: 06-2024 46
Bekijk gratis de handleiding van Frigor IOP730, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigor |
| Model | IOP730 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6676 MB |
