Frigor IOP730 handleiding
Handleiding
Je bekijkt pagina 45 van 78
1. Set the water softener
2. Load salt into the salt container
3. Load the basket
4. Load rinse aid into the rinse aid container
5. Fill the detergent dispenser
Before using your dishwasher:
Using your dishwasher:
Please see section "Water Softener" in "PART II: Using your IOP730 dishwasher",
if you need to change the setting of the water softener.
Please see section "Filling The Rinse Aid Reservoir" in "PART II: Using your
IOP730 dishwasher", on how to load rinse aid.
The salt container is located beneath the lower basket and should be lled as
explained in the following:
Loading Salt Into The Salt Container:
WARNING!
• Only use salt specically designed for dishwasher use!
Every other type of salt not specically designed for dishwasher use will damage the water
softening system. In case of damages caused by the use of unsuitable salt the manufacturer
does not give any warranty nor is liable for any damages caused.
• Only ll with salt immediately before running a cycle.
This will prevent any salt grains or salty water, which may have been spilled, from causing
corrosion.
IOP730
Version: 06-2024 45
Bekijk gratis de handleiding van Frigor IOP730, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigor |
| Model | IOP730 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6676 MB |
