Frigidaire PRDA1922SS handleiding
Handleiding
Je bekijkt pagina 17 van 36
17
CONTROLS AND SETTINGS
Alarms
Controls
DOOR OPEN
This alert indicates the door has been open for 5 minutes or more. The DOOR
OPEN LED illuminates and the audible alert sounds until the door is closed.
You can turn o the audible alert by pressing DOOR OPEN or by closing the
door. If the door is ajar for 5 minutes, the interior light turns o.
POWER OUTAGE
The POWER OUTAGE indicator light informs you of a power interruption. Reset
the alarm by pressing POWER OUTAGE.
HIGH TEMP
If the temperature increases above a safe temperature range, the red HIGH
TEMP LED light illuminates and the alarm sounds. Reset the alarm by pressing
HIGH TEMP.
1
2
3
You can use the lock button to lock the control display. Press and hold for 3 sec-
onds to enable. While in the locked state, you cannot make changes until unlocked.
Press and hold for 3 seconds to disable.
The settings icon illuminates upon opening the appliance door. Press the set-
tings icon to reveal other function icons. After 10 seconds of non use of icons or
door closure, all icons fade except the settings icon.
Adjusting Temp
To adjust the temperature setting, press + to raise the temperature and — to
lower the temperature on the appliance control display. Allow several hours for
the temperature to stabilize between adjustments.
TEMP °F/°C
Short press to toggle between Fahrenheit (°F) and Celsius (°C).
CHILL BOOST
Turning on CHILL BOOST cools the appliance down to a target temperature and
remains active for up to 24 hours before automatically deactivating or being
manually exited. To turn the function on/o, press CHILL BOOST. When you
turn o CHILL BOOST, it automatically resets the refrigerator back to the previ-
ous temperature setting.
AIR FILTERS
The AIR FILTERS replacement alert illuminates when it is time to replace the
air filters. See the FILTER REPLACEMENT section for instructions on how to
replace the air filters. After changing the air filters, reset the AIR FILTERS alert
by pressing and holding AIR FILTERS.
WATER FILTER
The WATER FILTER replacement alert illuminates when it is time to replace the
water filter. See the FILTER REPLACEMENT section for instructions on how to
replace the water filter. After changing the water filter, reset the WATER FILTER
alert by pressing and holding WATER FILTER. After replacing the water filter,
see the AUTOMATIC WATER DISPENSER section for instructions on how to
prime the water system.
WATER DISP
The illuminated WATER DISP LED means the internal water dispenser is ON.
Open the internal water dispenser by pushing the push-push nozzle. Press the
water dispenser paddle inside the cabinet to dispense water. Turn the dispens-
er o by pressing and holding WATER DISP for 3 seconds. When the water
dispenser is o, you cannot dispense water. You will hear a beep if you try to
press the paddle without turning on WATER DISP. Press and hold WATER DISP
to turn it on.
6
4
5
7
9
10
11
8
Bekijk gratis de handleiding van Frigidaire PRDA1922SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | PRDA1922SS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4122 MB |
