Frigidaire PRDA1922SS handleiding
Handleiding
Je bekijkt pagina 12 van 36
12
DOOR REMOVAL
or
or
Tools Necessary:
Socket
Wrench Set
Adjustable
Wrench
5/16"
(8mm)
Fixed
Wrench
Flathead
Screwdriver
and
or
Phillips
TM
Head or
#2 Square
Drive Head
8mm
(M5x16mm)
Hex head screw x3
x2
Door removal:
• Unplug the unit or switch the breaker
that supplies power to the unit to the
o position.
• Hold the door in place while remov-
ing the top hinge from the cabinet.
• Remove the M5x16 mm hex head
screws from the top hinge with a
wrench or socket.
• Lift the door upward and pull up and
away from the cabinet until free of
the bottom hinge pin mounted on
the front of the cabinet.
• To replace the door, reverse the above
procedures and securely tighten all
screws to prevent hinge slippage.
IMPORTANT
Before you begin, remove the electrical power cord from the wall outlet. Remove
any food from door bins.
CAUTION
Doors are heavy. Two people are
recommended to remove or replace
the door assembly from the cabinet.
CAUTION
Close the door prior to removing
or installing.
If you need to remove the door to
transport your unit, you must have a
consistent 9 mm door gap around the
perimeter of the cabinet to ensure proper
gasket sealing to prevent frost in freezer.
Measure the 9 mm gap from the metal of
the cabinet to the metal on the door.
9mm
Set hinge
parallel to
cabinet
Bekijk gratis de handleiding van Frigidaire PRDA1922SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | PRDA1922SS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4122 MB |
