Frigidaire PCCG3680AS handleiding
Handleiding
Je bekijkt pagina 16 van 20
16
CARE AND CLEANING
Cleaning the sealed burners
To avoid possible burns, do not attempt cleaning
before turning o all surface burners and allowing
them to cool.
Any additions, changes, or conversions required in
order for this appliance to satisfactorily meet the
application needs must be made by an authorized
qualified Agency. Routinely clean the cooktop.
Wipe with a clean, damp cloth and wipe dry to
avoid scratches. Keeping the surface burner head
ports and slots clean will prevent improper ignition
and an uneven flame.
To clean recessed and contoured areas of cooktop:
• If a spill occurs on or in the recessed or con-
toured areas, blot up spill with an absorbent
cloth.
• Rinse with a clean, damp cloth and wipe dry.
To clean burner heads:
1. Remove the burner cap and burner head (see
Figure 12). Clean the cap and head with hot
soapy water and dry thoroughly.
2. For burned-on and dried spills, apply hot soapy
water to the burner cap and head to allow time
for the soils to soften.
3. Use a toothbrush to clean all over the burner
head.
4. Wipe the burner cap and head clean with a
soft, clean cloth, sponge, or scratch-free clean-
ing pad. Wipe out burner orifice with a cloth
before placing burner head and cap back on.
The burner assembly must be completely dry
before use.
CAUTION
To avoid possible burns do not attempt to oper-
ate the surface burners without the burner caps.
Do not use spray oven cleaner on the cooktop.
Surface or Area Cleaning Recommendation
Gas cooktop surface burners See “Cleaning the sealed burners”
Gas cooktop surface grates
Gas cooktop burner caps
Use a non-abrasive plastic scrubbing pad and mild abrasive cleanser.
Do not allow food spills with a high sugar or acid content (milk, to-
matoes, sauerkraut, fruit juices or pie filling) to remain on the burner
grates or burner caps. These spills may cause a dull spot even after
cleaning. Clean these spills as soon as surfaces are cool. Thoroughly
dry immediately following cleaning.
5. Make sure the burner caps and heads are
placed and seated properly over the ignitor.
The three mounting legs on burner will align
with slots on the orifice holder. When placed
correctly, the burner cap should not move o
the burner head (see “Assembly of the Burner
Caps” on page 10).
6. If burner fails to light, recheck placement of
burner head to the orifice holder and cap.
Burner Cap
Burner Head
Burner Cup
Injector nozzle
Ignition
Spark Plug
Figure 11: Removable Dual burner components
Bekijk gratis de handleiding van Frigidaire PCCG3680AS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | PCCG3680AS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2085 MB |
