Frigidaire GRFN2023SS handleiding
Handleiding
Je bekijkt pagina 14 van 38
14
DOOR REVERSAL
11. Reconnect the electrical power cord
to the wall outlet.
Top Hinge
7. A. Flip the refrigerator door over
and remove the screw from the
auto-closer hook using a Phillips
head screwdriver and set it aside.
B.
Pry out the hinge bearing
from the door with a flat
head screwdriver.
C. Install the bottom hinge bearing
on the opposite side of the
door. Flip the auto-closer
hook over. Using the Phillips
head screwdriver, screw in the
auto-closer and fully tighten.
10. Ensure the door has approximately
0.68 in. (17.5 mm) between the
refrigerator door and freezer drawer.
Once level, securely tighten the hinge
screws. Replace the top hinge covers.
17.5mm/
0.68˝
Level the Door
8. Remove the left side top hinge from
the bag in the Crisper.
Install Plastic Plugs
6. Locate the three new plastic plugs
in the bag in the Crisper, and install
them on the center right hand side.
5. Screw in and fully tighten the
center hinge pin using an
adjustable wrench.
Center Hinge Pin
C
A
B
9. Lower the refrigerator door onto
the center hinge pin at a 90 degree
angle, and then close the door.
Apply the silicon grease from the
bag in the Crisper inside the bushing
on the door for the top hinge.
Align the holes of the top hinge
with the cabinet holes and reinsert
the three 8 mm screws. Do not fully
tighten the screws.
Bekijk gratis de handleiding van Frigidaire GRFN2023SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | GRFN2023SS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3903 MB |
