Frigidaire GRBN2012SS handleiding
Handleiding
Je bekijkt pagina 9 van 38
9
Flipper Mullion (some models)
Adjust the flipper mullion for proper
connection with the mullion guide by
ensuring the flipper mullion is folded and
perpendicular to the fresh food door. If
the mullion guide is not in the correct
position, it could prevent the door from
closing completely.
WRONG
INSTALLATION
Door
Door
Cabinet Leveling / 3-Door Model
Door Alignment (if necessary)
Guidelines for final positioning of refrigerator:
• Rest all 4 corners of the cabinet
firmly on the floor.
• Slightly elevate the front to ensure
doors close and seal properly.
• Align and level the doors with each other.
You can meet most of these conditions by
raising or lowering the adjustable front rollers.
To level the cabinet using the front rollers:
1. Slightly open freezer drawer to reveal
adjustable rollers at bottom of cabinet.
2. Make initial cabinet adjustments
by using the front roller height
adjusting screws. Use a ⅜” socket
wrench to turn the adjustment
screws (1 per side).
To raise unit: turn the adjustment
screw clockwise.
To lower unit: turn
adjustment
screw
counterclockwise
.
3. Ensure both doors are bind-free with
their seals touching the cabinet on all
4 sides and the cabinet is stable.
4. After you level the unit, lower the
anti-tip leg until it firmly contacts
the floor. You may need to use an
adjustable wrench for adjustment.
If the doors are not aligned, lift the
lower door up and insert the washer
(two are included in the plastic bag
in the Crisper) on the center hinge
pin. This will raise the door to be
aligned with the other door.
Bekijk gratis de handleiding van Frigidaire GRBN2012SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | GRBN2012SS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3911 MB |
