Frigidaire GRBN2012SS handleiding
Handleiding
Je bekijkt pagina 13 van 38
13
1. With the door closed, use a plastic
putty knife to remove the left hand
top hinge cover. Then, unsnap the
right hand top hinge cover and set
both aside. Remove the three 8 mm
screws from the top hinge. Carefully
remove the door from the unit and
set aside.
CAUTION
Place the doors on a padded surface to
avoid damage where they cannot fall
and cause personal injury.
For the 2-door model only:
2. Unscrew the center hinge pin using
an adjustable wrench and set it aside.
CAUTION
The door is heavy. We recommend two
people to remove or replace the door
assembly from the cabinet.
DOOR REVERSAL
Center Hinge
3. Using the putty knife remove the
three plastic plugs on the center left
hand side.
4. Open the freezer drawer to prevent
damaging the unit while you remove
the center hinge. Using a T20 Torx
driver, remove the three screws from
the center hinge. Flip the center
hinge over and install it on the left
side of the unit.
NOTE
For the following steps, find replace-
ment parts in the plastic bags located
in the Crispers.
Center Hinge Pin
Remove Plastic Plugs
5. Screw in and fully tighten the
center hinge pin using an
adjustable wrench.
Center Hinge Pin
Bekijk gratis de handleiding van Frigidaire GRBN2012SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | GRBN2012SS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3911 MB |
