Frigidaire GMOS1968SS handleiding
Handleiding
Je bekijkt pagina 16 van 52
EQUI
VALENT
NUM
BER
EQUI
VALENT
DUCT PIECES
LENGTH x USED = LENGTH
Roof Cap 24 Ft. (7.3 m) x (1) = 24 Ft. (7.3 m)
12 Ft. (3.6 m) x (1) = 12 Ft. (3.6 m)12 Ft. (3.6 m) Straight
Duct (6”/15.2 cm
Round)
5 Ft. (1.5 m) x (1) = 5 Ft. (1.5 m)Rectangular-to-
Round Transition
Adaptor*
Equivalent lengths of duct pieces are based on actual t
ests and
reflect requirements for good venting performance with any
vent hood.
Total Length = 41 Ft. (12.5 m)
The
following chart describes an example of one
possible ductwork installation.
OUTSIDE TOP EXHAUST (EXAMPLE ONLY)
N
OTE: For back exhaust, care should be taken to align exhaust with space between studs, or wall should be
prepared at the time it is constructed by leaving enough space between the wall studs to accommodate exhaust.
* IMPORTANT: If a rectangular-to-round tr
ansition adaptor is used, the bottom corners of the damper
wil
l have to be cut to fit, using the tin snips, in order to allow free movement of the damper.
The following chart describes an example of one
possible ductwork installation.
Installation Instructions
O
UTSIDE BACK EXHAUST (EXAMPLE ONLY)
EQUIVALENT N
UMBER
EQUIVALENT
DUCT PIECES
LENGTH* x USED = LENGTH
W
all Cap
40 Ft. (12.2 m)x (1) =
40 Ft. (12.2 m)
3 Ft. (0.9 m) x (1) =
3 Ft. (0.9 m)
3 Ft. Straight Duct
(
3
1
⁄4” x 10”/8.2 x
25.4 cm
Rectangular)
90° Elbow 10 Ft. (3 m) x (2) =
20 Ft. (3 m)
Equivalent lengths of duct pieces are based on
actual tests and reflect requ
irements for good
venting performance with any vent hood.
Total Length = 63 Ft. (19.2 m
)
EXTERNAL EXHAUST DUCTING
EN-15
Bekijk gratis de handleiding van Frigidaire GMOS1968SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | GMOS1968SS |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 10247 MB |
