Frigidaire GMOS1266SS handleiding
Handleiding
Je bekijkt pagina 21 van 72
Installation Instructions
C3.
ADAPTING MICROWAVE AIR
DIRECTOR FOR OUTSIDE
BACK EXHAUST
1
Remove the screw that holds the blower
plate to the microwave. Remove the cover
plate.
Back of
Microwave
Blower Plate
Cover Plate
C2.
USE TOP CABINET TEMPLATE
FOR PREPARATION OF TOP
CABINET
You need to drill holes for the top support
screws and a hole large enough for the power
cord to fit through.
• Read the instructions on the TOP CABINET
TEMPLATE.
• Tape it underneath the top cabinet.
• Drill the holes, following the instructions on
the TOP CABINET TEMPLATE.
CAUTION:Wear safety goggles when drilling
holes in the cabinet bottom.
2
Carefully pull out the air director.
Forward
Openings Facing
Before:
Air Director
3
Rotate the air director counterclockwise 180°
Before Rotation After Rotation
4
Place the air director back into the opening.
AFTER: Air Director
Openings Facing Back
5
Replace blower plate with the screw
removed in Step 1. Make sure the screw is
tight.
Back of
Microwave
EN-20
Bekijk gratis de handleiding van Frigidaire GMOS1266SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | GMOS1266SS |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 11447 MB |
