Frigidaire GHPH142AA1 handleiding
Handleiding
Je bekijkt pagina 15 van 32
15INSTALLATION INSTRUCTIONS
1. Open the window sash and place the
window slider kit on the window sill. The
clamp must face to the window sash. Adjust
the length of the window slider kit according
to the width of window.
Note: Reserve gaps between sealing strips on
the main panel and telescopic panel to
ensure telescopic panel can move normally.
Window slider kit
window sill
Installation in a double-hung sash window
Adhesive the sealing strip to the four edge of
the back of window slider kit.
3. Drive four 3/4" screws to secure the
window slider kit.
5. Cut the non-adhesive window foam to an
appropriate length and seal the open gap
between the lower window sash and upper
window sash.
3/4"screws
4. To secure lower sash in place, attach
adhesive velcro on the upper sash frame,
then adhere the wedge on it to lock the lower
sash.
Note: the wedge can also be fix by a 1/2”
screws.
2. Close the window sash securely against
the window slider kit. Then fasten the clamp
on the window sash.
To release the clamp, press down the button
as shown below.
Press button
to release
Gaps
Sealing strip (adhesive type)
Window foam
Bekijk gratis de handleiding van Frigidaire GHPH142AA1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | GHPH142AA1 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3188 MB |
