Frigidaire FRMS274TAV handleiding
Handleiding
Je bekijkt pagina 14 van 152
6.1 Before Installing The Water
Supply Line
WARNING!
To avoid electric shock, which can
cause death or severe personal injury,
disconnect the appliance from the
electrical power before connecting a
water supply line to the appliance.
CAUTION!
To avoid property damage:
• Use copper or stainless steel
braided tubing for the water supply
line. Do not use water supply
tubing made of 1/4" plastic. Plastic
tubing greatly increases the
potential for water leaks, and the
manufacturer will not be
responsible for any damage if you
use plastic tubing for the supply
line.
• Do not install water supply tubing in
areas where temperatures fall
below freezing.
• Chemicals from a malfunctioning
softener can damage the ice
maker. If the ice maker is
connected to soft water, ensure
that the softener is maintained and
working properly.
IMPORTANT
Ensure your water supply line
connections comply with all local
plumbing codes.
6.2 You will need
• Basic tools: adjustable wrench, flat-
blade screwdriver, and Phillips™
screwdriver.
• Access to a household cold water line
with water pressure between 30 and
100 psi.
• A water supply line made of 1/4" (6.4
mm) OD, copper or stainless steel
tubing. To determine the length of
tubing needed, measure the distance
from the ice maker inlet valve at the
back of the appliance to your cold
water pipe. Then add approximately 6 ft
(1.8 m) to ensure you can move the
appliance for cleaning.
• A shutoff valve to connect the water
supply line to your household water
system. Do not use a self-piercing type
shutoff valve.
• Do not reuse compression fitting or use
thread seal tape.
• A compression nut and ferrule (sleeve)
for connecting a copper water supply
line to the ice maker inlet valve.
NOTE
Check with your local building
authority for recommendations on
water lines and associated materials
prior to installing your new refrigerator.
Depending on your local/state building
codes, Frigidaire recommends:
• for homes with existing valves its
Smart Choice® water line kit
5304437642 with a 6 ft stainless
steel water line.
Please refer to Frigidaire.com for
more information.
6.3 Installing the Water Supply
Line
IMPORTANT
Your appliance water supply system
includes several tubing lines, a water
filter, and a water valve. To ensure
that your water dispenser works
properly, this system must be
completely filled with water when your
appliance is first connected to the
household water supply line.
Connection to household water supply
with 1/4" compression fitting
A
B
A. Water inlet fitting
B. Plastic tubing to water valve
14 ENGLISH
Bekijk gratis de handleiding van Frigidaire FRMS274TAV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | FRMS274TAV |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 17385 MB |
