Frigidaire FDSH4502BF handleiding
Handleiding
Je bekijkt pagina 22 van 24
22
Error code and descprition
When occur
Error code
E1
E2
E3
E4
E6
E7
Ed
Symptom
Possible Causes
When the non-water switch
work in wash step at Pre-
wash phase.
All driving parts except for
the drain part are turned off
and draining is performed
for 120 seconds.(without
retry)
The water supply pressure is low. The
water supply valve is closed. the non-
water switch is broken. the wash
pump doesn’t work.
The Main PBA has some problems.
When the high-water float
switch is on for 5 seconds
in 5 �mes.
When the high water float
switch is on for 120
seconds.
All driving parts except for the
drain part are turnedoff and
draining isperformed for
120 seconds.(without retry)
When the hea�ng
con�nually for 60
minutes,yet s�ll not arrive
the an�cipated
temperature.
The high-water float switch is
broken. The water value is always
open(It cannot be closed).
The
Main PBA has some problems.
All driving parts except for
the drain part are turned off
and draining is performed
for 120 seconds.(without
retry)
The heater is broken.
The thermistor doesn't work
The Main PBA has some problems.
When the water leakage
sensor date is equal to less
than 3V for 2 seconds.
All driving parts except for
the drain part are turned off
and draining is performed
for 120 seconds.(without
retry)
When the thermistor is
under open-circuit failure.
The case brake fails to detect the
pulse.
The valve water is out of order.
The overflow sensor is broken.
There is a water leakage.
All driving parts except for
the drain part are turned off
and draining is performed
for 120 seconds.(without
retry)
The Thermistor is broken.
The main PBA fails to detect
the pulse.
When the thermistor is
under short-circuit failure.
All driving parts except for
the drain part are turned off
and draining is performed
for 120 seconds.(without
retry)
The Thermistor is broken.
The main PBA fails to detect the pulse.
Keep going remained cycle
When communica�ons
between the main PBA and
the sub PBA fails for 20
seconds
normally.
The main PBA or sub PBA is out of
order.
The communica�ons connec�on for the
main PBA or sub PBA is not properly
connected.
When error occurs, press Normal+Sanitize+Delay to power off and reset the
dishwasher.
The wire is not connected correctly,
or the distributary valve is broken.
E8
The orientation of the
distributary valve not
working.
All driving parts except for
the drain part are turned off
and draining is performed
for 120 seconds.(without
retry)
Bekijk gratis de handleiding van Frigidaire FDSH4502BF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | FDSH4502BF |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3398 MB |
