Handleiding
Je bekijkt pagina 32 van 97
32
Do not put packages and food in contact with the wall at the back of the appliance, this is a
particularly cold and damp area of the appliance and water droplets, and frost condense there
as part of your refrigerator's normal operation.
The coldest area, indicated by the logo “OK”, is designed for delicate, sensitive and highly
perishable food: meat, poultry, fish, cooked meats, prepared dishes, ready-made salads, egg or
cream-based dishes and pastries, fresh pasta, pastry, pizza/quiches, fresh produce and raw
milk cheese, ready- to-use vegetables sold in plastic bags and, more generally, any fresh
product whose consume-by date is linked to its storage at a temperature of +4°C or below.
6. CARE AND MAINTENANCE
Defrosting
Defrost your appliance when frost is accumulated on the evaporator is about 2mm:
• Remove all contents from the appliance and unplug it.
• Leave the fridge door open to allow melting of the ice.
• Remove large pieces of ice if necessary with dishcloth or something that will not
damage the walls.
• Do not use hot water or other electric heaters to melt the accumulated ice.
• After defrosting, remove the accumulated ice / water and try the appliance with a
soft cloth.
• Restart the unit according to the start instructions. Never use a knife or other sharp
instrument to scrape ice inside.
Cleaning inside the fridge
After defrosting you should clean the fridge internally with a weak solution of bicarbonate of
soda. Then rinse with warm water using a damp sponge or cloth and wipe dry. Wash the baskets
in warm soapy water and ensure they are completely dry before replacing in the fridge. Water
will flow into the defrost drain, it doesn't matter if the amount of water is not large, this water
arrives in the recovery tank located at the back and evaporates naturally.
Caution: Make sure that no pieces of food are clogging the defrost drain.
If you're going on vacation
If your appliance is not to be used for several months, remove all food, turn off and unplug the
appliance from the outlet. Clean and dry the inside and outside of the appliance thoroughly. Also
leave the door open, blocking it if necessary, to prevent condensation, odors, mold.
Moving the unit
After any movement, it must not be connected for 4 hours. This delay allows the coolant to
be adjusted.
Energy saving tips
• The refrigerator should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the refrigerator.
Overloading the refrigerator forces the compressor to run longer. Foods that freeze
too slowly may lose quality, or spoil.
Bekijk gratis de handleiding van FrigeluX SPNF177BI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | FrigeluX |
| Model | SPNF177BI |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 16993 MB |
