Handleiding
Je bekijkt pagina 29 van 98
29
2. Put screw into the hole of rubber supporting pad
3. Make screw in alignment with the hole on lower base cover. Fasten rubber supporting
pad to the base cover firmly by a cross screwdriver (self-provided).
Cleaning before first use
Wipe the inside of the appliance with soapy water. Then rinse with lukewarm water using a
sponge or cloth. Wash drawers and flaps in warm soapy water and dry them completely before
replacing them in the appliance. Clean the exterior of the device with a damp cloth.
If you need more information, see the cleaning section.
Before plugging in your device
Check that you have an outlet that is compatible with the plug supplied with the refrigerator. If
not see the section titled ELECTRICAL INFORMATION.
DO NOT START UP FOR FOUR HOURS AFTER THE UNIT HAS BEEN MOVED.
The coolant needs time to settle. If the unit is turned off at any time, wait 30 minutes before
plugging it back in to allow the coolant to properly replenish.
Before filling the device
Before storing food in your refrigerator, plug it in and wait for 4 hours to make sure it is working
properly.
Installing the door handle
For the convenience of transportation, the door handles are separately provided in a plastic
bag, you can install the door handles as follows:
1. Take out screw covers on the left/right side of the door, and then put them back to the
plastic bag.
2. Match the handle on the left/right side of the door, keeping axes of the screw holes in
the handle and the door in a line, as the picture shows.
Bekijk gratis de handleiding van FrigeluX RANF322BE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | FrigeluX |
| Model | RANF322BE |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 16886 MB |
