Friedrich ZoneAire Premier ZHV16DA Handleiding (96 Pagina's)

Handleiding

27

Troubles Possible Causes Suggested Remedies

1.Unit does not start

when pressing on/off

button

Water full indicator lamp blinks,

and water tank is full.

Dump the water out of the

water tank.

Room temperature is higher than

the setting temperature. (Electric

heating mode)

Reset the temperature

Room temperature is lower than

the setting temperature. (Cooling

mode)

Reset the temperature

2. Not cool enough

The doors or windows are not

closed.

Make sure all the windows

and doors are closed.

There are heat sources inside the

room.

Remove the heat sources if

possible

Exhaust air hose is not

connected or blocked.

Connect or clean the exhaust

air hose.

Temperature setting is too high. Reset the temperature

Air inlet is blocked.

Clean the air inlet.

3. Noisy

The ground is not level or not flat

enough

Place the unit on a flat, level

ground if possible

The sound comes from the

flowing of the refrigerant inside

the air conditioner

It is normal.

4. E7 Code

Display board communication

failure

Replace the display board or

check whether the

communication cable is falling

off

5. E1 Code

Internal coil overheat protection Contact after-sales processing

6. E2 Code

Outdoor ambient temperature is

too low to protect when cooling

Contact after-sales processing

7. E3 Code Outdoor ambient temperature is

too high to protect when heating

Contact after-sales processing

9. Trouble Shooting

Bekijk gratis de handleiding van Friedrich ZoneAire Premier ZHV16DA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.