Friedrich ZoneAire Premier ZHV16DA handleiding

Airco

Friedrich

96 pagina's

PDF beschikbaar

Handleiding

Checkup whether the exhaust hose has been mounted properly.

Cautions for cooling and dehumidifying operations:

- When using functions on cooling and dehumidifying, keep an interval of at least 3 minutes

between each ON/OFF.

- Power supply meets the requirements.

- The socket is for AC use.

- Do not share one socket with other appliances.

- Power supply is AC115V，60Hz

6.2 Cooling operation

- Press the “Mode” button till the “Cool” icon appears.

- Press the “+” or “-” button to select a desired room temperature. (16℃-31℃/61℉-88℉)

- Press the “SPEED” button to select wind speed.

6.3 Dehumidifying operation

Press the “Mode” button till the “Dehumidify” icon appears.

- Automatically set the selected temperature to current room temperature minus 2℃.

(16℃-31℃/61℉-88℉)

- Automatically set the fan motor to LOW wind speed.

6.4 Fan operation

- Press the “Mode” button till the “Fan” icon appears.

- Press the “SPEED” button to select wind speed.

6.5 Heating operation (this function is not available for a cold-single unit)

- Press the “Mode” button till the “Heat” icon appears.

- Press the “+” or “-” button to select a desired room temperature. (16℃-31℃/61℉-88℉)

- Press the “SPEED” button to select wind speed.

6.6 Timer operation

Timer ON setting:

- When the air-conditioner is OFF, press the “Timer” button and select a desired-ON time through the

temperature and time setting buttons.

- “Preset ON Time” is displayed on the operation panel.

- ON time can be regulated at any time in 0-24 hours.

- Press the “Timer” button again to confirm, Timer indicator turns on.

- To deactivate the timer function, press“Timer” button until the timer indicator turns off.

Timer OFF setting

- When the air-conditioner is ON, press “Timer” button and select a desired OFF time through the

temperature and time setting buttons.

- “Preset OFF Time” is displayed on the operation panel.

- OFF time can be regulated at any time in 0-24 hours.

- Press the “Timer” button again to confirm, Timer indicator turns on.

- To deactivate the timer function, press “Timer” button until the timer indicator turns off.

6.7 Auto SWING

After the machine turns on, pressing this key, the louver will swing continuously up and down; by

pressing this button again the movement will stop, and the louver remains in that position.

6.8 SLEEP mode

- While in cooling mode, press the SLEEP key to set the temperature. It increases1 ℃ after an hour and at

most increases 2 ℃/4℉ after 2 hours.

- While in heating mode, press the SLEEP key to set the temperature. It decreases 1 ℃ after an hour and

Bekijk gratis de handleiding van Friedrich ZoneAire Premier ZHV16DA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.