Friedrich WallMaster WCVT12B30A Handleiding (90 Pagina's)

Handleiding

20 20

OPERATION

User Interface - Kuhl Q

All of the control panel function buttons and mode icons can be viewed in Figure 305.

Power On – Press the button to turn on the air conditioner. The power button illuminates to indicate that the power is on. The backlight on the power

switch will automatically turn off after 20 seconds of inactivity. The remote control can also be used to turn power ON / OFF (see Remote Control).

Display – The display is a high efciency LCD with a built-in backlight. After 20 seconds of inactivity, the display switches off. Touching any button

automatically changes the display to full brightness.

There are three control push buttons on each side of the display.

-AUTO-

Automatically switches

between cool & heat

CONTROL

LOCKED

WI-FI OPERATING

STATE

TEMPERATURE

UP

TEMPERATURE

DOWN

2 DIGIT DISPLAY

Shows Setting for:

- Set Point (Temperature)

- Clock (AM/PM)

FILTER

Check / clean

FAN SPEED

Sets fan speed:

LOW, MED, HIGH,

OR MAX

(Actual settings are

model dependant)

FAN

Sets fan to either:

- Automatically cycle

- Continuously run

COOL HEAT FAN ONLY DISCONNECTED FROM

POWER BOARD

MODE

Cycles between

COOL, HEAT, FAN

ONLY or -AUTO-

(if equipped)

ON / OFF

Turns unit on/off

TIMER

shows on or off

Figure 305 (Control Panel and Display)

Bekijk gratis de handleiding van Friedrich WallMaster WCVT12B30A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.