Fridgemaster MCF200E handleiding
Handleiding
Je bekijkt pagina 31 van 37
Troubleshooting
Problem
Possible cause & Solution
Power failure
Power cord
problems
If the supply cord is damaged. It must be replace by a
special cord or assembly available from the manufacturer
or the service agent.
The freezer must be positioned so that the plug is
accessible.
When not used
for along period
Remove all items from the compartment and disconnect
the power cord plug from the wall outlet.
Transportation
Disconnect the power cord plug from the wall outlet.
Clean the compartment interior and wipe away all water.
To prevent mold formation and foul odors, leave the door
open to dry the compartment completely.
When moving the appliance, make sure that the feet do not
damage the power cord.
Do not let the feet hit against floor steps, thresholds, etc.
Condensation on
cooler exterior
The circumference
of freezer feels hot
Pipe
29
Condensation may condense on the exterior and door
during hot and humid days or depending on the place of
installation. This occurs when the humidity is high and
water particles in the cold surfaces. This is normal. Wipe
away condensation with a dry cloth.
Especially in summer or in starting running, the
circumference of freezer feels hot. Because freezer inside
has a pipe for radiating and preventing condensation.
The heat do not affect inside goods.
Keep the opening and closing of the door for a minimum to
prevent cold air from escaping.
Avoid placing new items in the cooler as this will raise the
temperature inside the compartment.
In case of a long power suspension, place dry ice in the
freezer.
Bekijk gratis de handleiding van Fridgemaster MCF200E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fridgemaster |
| Model | MCF200E |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 2466 MB |
