Handleiding
Je bekijkt pagina 5 van 36
5
INSTRUCTIONS FOR THE USER
GB
TECHNICAL CHARACTERISTIC TABLE
DIRECTIVE 2012/19/EU (WEEE)
This information is intended exclusively for owners of appliances with the symbol of Fig. A in the adhesive label
showing the technical data applied to the product itself (serial number label):
This symbol indicates that the product is classi ed according tocurrent regulations, being electrical or
electronic equipment and complies with Directive 2012/19/EU (WEEE) therefore, at the end of its useful
life, it must be treated separately from household waste, delivering it free of charge to a separate collection
centre for electrical and electronic equipment or returning it to the retailer at the time of purchase of new
equivalent equipment.
The user is responsible for taking the appliance at the end of its life to the appropriate collection facilities, otherwise
incurring the penalties provided for by the current waste legislation.
Adequate separate collection for future use of the equipment assigned for recycling, treatment and environmentally
compatible disposal helps to prevent possible negative e ects on the environment and on human health and
promotes recycling of the materials that compose the product.
For more detailed information regarding the collection systems available, contact the local waste disposal service, or
the store where the purchase was made.
Manufacturers and importers must comply with their responsibility for environmentally compatible recycling,
treatment and disposal either directly or by participating in a collective scheme.
INSTRUCTIONS FOR THE USER
It is necessary that all the operations regarding the installation, adjustment and adaptation to the type
of gas available are carried out by quali ed personnel, in conformity with the regulations in force.
The speci c instructions are described in the booklet section intended for the installer.
USING THE BURNERS
The symbols silk-screen printed on the side of the knob indicate the correspondence between the knob and the
burner.
• START-UP WITHOUT VALVES
Turn the corresponding knob anticlockwise up to the maximum position (large ame, g. 1) and press start-up button
P ( g. 1).
• AUTOMATIC START-UP WITH VALVES
Turn the corresponding knob anticlockwise up to the maximum position (large ame, g. 1) and press the knob. Once
the burner has been started up, keep the knob pressed for about 6 seconds.
• USING THE BURNERS
In order to obtain the maximum yield without waste of gas, it is important that the diameter of the pot is suitable for
the burner potential (see the following table), so as to avoid that the ame goes out of the pot bottom ( g. 2).
Use the maximum capacity to quickly make the liquids reach the boiling temperature, and the reduced capacity to
heat food or maintain boiling. All of the operating positions must be chosen between the maximum and the minimum
ones, never between the minimum position and the closing point.
Bekijk gratis de handleiding van Freggia HCG430VGTB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Freggia |
| Model | HCG430VGTB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3308 MB |
