Franke Maris Water Hub handleiding
Handleiding
Je bekijkt pagina 14 van 121
14
Tap supplies no warm water
Cause Remedy
Hose(s) kinked. Inspect the hose(s) and straighten the kinked hose(s).
Boiler not functioning. See table “The water from the tap is not boiling”.
Warm water appliance not
functioning.
Consult the manual of your warm water appliance, warm water
support or Bypass.
The water from the tap is not boiling
Cause Remedy
The plug of the boiler has not been
inserted into a wall plug socket.
Insert the plug into an earthed wall plug socket.
The wall plug socket has no power
supply.
Check the electricity supply.
The electricity circuit has failed due to an excessive load. The
boiler cannot be connected to the same electricity circuit as a
dishwasher.
The boiler is OFF (standby mode). Switch the boiler ON.
The boiler has not heated up
completely.
Wait until the boiler has heated up.
The boiler is defective. Contact Franke.
The boiler causes a short-circuit
Cause Remedy
There is a short-circuit in the
electric wiring or the heater
element of the boiler.
Remove the plug of the boiler from the wall plug socket.
Contact Franke.
No water in the boiler. Led is
blinking blue.
Fill the boiler with water.
If you can‘t manage your malfunction or defect please contact the Franke service desk, installer or
retailer.
EN
Bekijk gratis de handleiding van Franke Maris Water Hub, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Franke |
| Model | Maris Water Hub |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15005 MB |
