Franke 392-14 handleiding
Handleiding
Je bekijkt pagina 12 van 40
Assembly
Installation between or in cupboards
without bases.
3,5 X 13
Fig. 3
The cooker hood is installed using
brackets.
Mark out and fasten screws (3,5 x 13) so
that they protrude a few millimetres from
both cupboard sides as illustrated, Fig. 3A.
If it is intended to align the underside of the
cooker hood with the underside of the row
of cupboards, use the upper measurement,
102, see Fig. 3A. The cooker hood brackets
are adjustable to fit various cupboard
depths, Fig. 3B.
BA
C
3,5 X 6,5
3,5 X 13
Fig. 4
Move the cooker hood brackets without ful-
ly tightening the screws (3,5 x 6,5) helt och
justera konsolerna så att de passar mot
skåpsidorna, Fig. 4A. Hang the cooker hood
in the pre-installed screws in the side of the
cupboard. Tighten the screws in the bracket
and on the wall, Fig. 4B. Lock the brackets
into position using the locking screws, Fig.
4C (3,5 x 13).
Installation in cupboards with bases.
Fig. 5
3,5 X 13
Fig. 6
The cooker hood is installed using
brackets.
Using a saw, cut out a hole in the base of
the cupboard, Fig. 5. Attach the brackets as
far into the cooker hood as possible. Insert
the cooker hood up into the hole in the
base of the cupboard. Pull out, Fig. 6A,
oand use screws to fasten the brackets to
the sides of the cupboard, Fig. 6B, with
screws 3,5 x 13. Tighten the brackets in
the cooker hood.
12
991.0506.009/D000000006909/180373/2021-10-05
Bekijk gratis de handleiding van Franke 392-14, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Franke |
| Model | 392-14 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4217 MB |
