Handleiding
Je bekijkt pagina 15 van 36
-25- -26-
Troubleshooting
Troubleshooting
Problems
Gas leak
Too much Air is mixed
with the gas pipe
The burner heads and
caps are not in place
Ignition device dirty or wet
Safety valve not open
Thermocouple is dirty
Gas supply is not
properly connect-
ed or turned on
The burners are dirty, or
nozzle is blocked
The burners’ nozzle is
blocked
The burners are dirty,
or nozzle is blocked
The burner heads and
caps are not in place
Remove the Burner head/cap and
reinsert it again firmly. (check burner
assembly instruction for details.)
Remove burners, rinse with clean
water and wipe it.
Clean the fire hole surface on
the burner
Remove burners,rinse with clean
water and wipe dry.
Wipe with a dry cloth
Possible cause
You smell gas.
Burners do not light
The flame is small
Flame length is uneven
After the overflow of the
pot, a large amount of soup
overflowed and flowed into
the inner cavity of the bottom
cup of the burner, causing
uneven air output.
Please clean up the spilt liquid in time
after spilling the pot. Clean the spill with
a clean rag, remove the flamethrower
and fire cover, check whether there is
liquid in the bottom cup of the burner, if
there is, please clean it in time.
Flame length is uneven
Turn the burner knob to OFF and retry
lighting the burner again. If still does
not work, please call your gas supplier
for help.
Light the burner repeatedly until the
air has completely gone out
Remove the Burner head/cap and
reinsert it again firmly. (check burner
assembly instruction for details.)
Wipe with a dry cloth
Press and turn the knob, make sure
the burner is on and keep pressing
for 3 to 4 seconds.
Do not use cooktop. Turn the burner
knob to OFF and open the window.
Do not touch any light switches or
telephone. Leave the house immedi-
ately and go outside to call your gas
supplier for help with a cell phone.
Action
Cleaning and maintenance
■ Maintenance
1. Before cleaning, please take
remove pan supports and flame
caps.
2. Movable parts of burner like copper
flame cap must be washed with
warm water and neutral cleanser
freguently. Remove the nugget and
dry it, then use the stove.
3. Please use neutral cleanser
which is without corrosiveness,
to clean the stainless steel
panel and burner. Never use
chlorine-base cleanser to clean
glass.
4. Make sure that there is no carbon
in the firehole, and no jam.
5. Please don't use such aculeated
articles as graininess abluent
(putty-powder), clean ball, knife,
etc. to clean the residual stubborn
besmirch in the burners. Other-
wise, it will make the kitchen
countertop go wrong or fray the
assembly surface, then influence
cooktop lifespan.
6. After cleaning, dry them well
and install them correctly.
7. If the flame is abnormal, please
check whether the nozzle is
blocked, if yes, clean it with the
needle.(The needle placed in
attachment package)
Neutral
Graininess Cleanser
Aculeated Articles (Knife etc.)
Clean Ball
NeutralWarm water
nozzle
Bekijk gratis de handleiding van Fotile GLG90505, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fotile |
| Model | GLG90505 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 13818 MB |
