Handleiding
Je bekijkt pagina 24 van 36
- 8 - - 9 -
During operation of the range hood, the lock screen button is not active. If pressed, it will make a clicking sound.
■
Carbon lter change reminder
It is off by default, and it is only applicable to users who have separately purchased and installed the
"carbon lter".
In Off state, simultaneously hold down the lighting button
、
high mode/turbo mode and low
mode/middle mode button
for 3 seconds
，
After hearing a clicking sound, the carbon lter change
reminder lamp will be lit and then go out after 1 second. The carbon lter change reminder function is
enabled. When this function is enabled, simultaneously holding down the lighting button
、
high
mode /turbo mode
and low mode/middle mode button for 3 seconds will disable the carbon lter
change reminder function, and a clicking sound will be heard.
When the carbon lter change reminder lights up, please promptly change the carbon lter in the range
hood. After completing the change in Off state, simultaneously hold down the lighting button
and
high mode/turbo mode
for 3 seconds
，
After hearing the clicking sound, the carbon lter change
reminder lamp will go out, and the change process is nished.
Cleaning and Maintenance
Warning: 1. There will be a risk of re if the range hood is not cleaned as specied in this manual.
2.To avoid electric shock, ensure the power cable is unplugged before cleaning and
maintaining the range hood.
3. Make sure that no water gets into the electrical parts such as the motor or control buttons during
cleaning.
4.Do not put your hand into the fan operating area during operation of the fan.
5.Do not use such solvents as gasoline and benzene or such corrosive chemicals
as strong alkali and strong acid for cleaning the range hood.
For better use, please clean the surface of the range hood, oil collection device and front lter assembly frequently.
Frequent cleaning of the surface of the range hood, oil collection device and front filter assembly is
benecial to prolonging the service life of the range hood.
Surface Cleaning of the Appliance
Warning
：
When cleaning, please do not use such rough items such as cleaning balls, brushes or
coarse cloth to protect the surface of machine body from scratches.
1. Clean with neutral soap or neutral detergent, and dry the surface of machine body with a soft cloth after
cleaning.
2. Use neutral detergent to clean any stubborn dirt on the surface of range hood. Drop detergent onto the
dirty area and leave it for a while, wipe off the dirt with a soft cloth, remove the detergent with a slightly
damp towel, and then wipe the surface of the range.
3. Do not allow stains to remain on the surface of the range hood for too long.
4. If the stainless steel surface is accidentally stained with saline solution, disinfectant, bleaching powder or
other detergents (most of the solvents contain harmful chemical components), immediately wipe it with
wet cloth and then wipe it dry with a dry cloth.
Cleaning the Wing Plate
1. Grasp the front edge of wing plate with hands, pull it down to detach the locking tab of the wing plate (Fig. 1).
Then ip it down at a certain angle, and remove the wing plate horizontally with hands nally (Fig. 2).
2. Soak the wing plate in warm water with neutral detergent, and wash it clean with soft brush or in
the dishwasher.
3. Reinstall the wing plate after cleaning and wiping.
Fig.2Fig.1
Prompts : 1. The range hood will shut down automatically if it is not operated for two minutes;
2.It is suggested to turn on the range hood when cooking to keep the kitchen
air fresh, otherwise the gesture function may be triggered when more vapor
passes by the induction window;
3. For the specic change process of carbon lter, please refer to the following
P9 "Operating Steps of carbon lter Change".
Cleaning of Oil filter
1. First remove the wing plate (see Fig. 1 and Fig. 2)；
2. Remove the screw and oil filter (see Fig. 3 and Fig. 4)；
3. Immerse the front filter in warm water with neutral detergent；
4. Reinstall oil filter and wing plate after cleaning and airing.
Fig.4Fig.3
Cleaning and Maintenance Cycle
Note: Please determine the specic cleaning period based on the actual cooking situation.
Parts to be cleaned Recommended Cleaning (or Change) Cycle
Surface of the complete
appliance
After each use
Wing plate Clean weekly
Bekijk gratis de handleiding van Fotile EMG9008, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fotile |
| Model | EMG9008 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 7497 MB |
