Handleiding
Je bekijkt pagina 20 van 24
E-8
Auto standby function
When the mode select switch is set to VOLUME
or TONE, the auto standby function is enabled.
When the auto standby function is enabled, if
there is no input signal for four hours, the unit au-
tomatically enters the standby mode.
<Note>: Depending on the source noise level or the
connection condition, the auto standby function may
not correctly work.
When the unit is in the standby mode, the
“FOSTEX” logo on the front panel ashes.
<Note>: When the mode select switch is set to OFF,
the auto standby function is disabled.
Entering the standby mode manually
By long-pressing the [CONTROL] knob when the
mode select switch is set to OFF, you can turn
the unit to the standby mode.
This feature would be useful when you go outside
the studio for a while.
Releasing the standby mode
When the unit is in the standby mode, pressing
the [CONTROL] knob releases the standby mode
and returns to the normal condition.
When the mode select switch is set to OFF, the
parameter lock function is enabled and the unit is
in the following conditions.
• You cannot change the setting values.
• The auto standby function is disabled.
Standby function Parameter lock function
Bekijk gratis de handleiding van Fostex PX-5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fostex |
| Model | PX-5 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 5316 MB |
