Handleiding
Je bekijkt pagina 29 van 92
Appliance description
29
ENG
3.1 Operating the hob with the sensor keys
The glass ceramic hob is operated with touch control
sensor keys. The sensor keys are operated as follows:
lightly touch a symbol on the surface of the ceramic glass
plate. A buzzer will indicate when the controls have been
operated correctly.
The touch control sensor key will then be indicated as
“key”.
Permanent pan recognition
If the hob has permanent pan recognition, a cooking
setting can only be directly switched on via the sensor
fi eld after a pan has been detected on the hob and the
power display shows 0.
On-/Off key
(5)
This key is used to switch the entire hob on and off . It is,
as it were, the main switch.
Power setting display and key (7) too
The power setting indicator shows the cooking level
which has been selected, or:
..................Residual heat
..................Power boost
..................Pan recognition
..................Automatic boost function
..................Stop function
...................Childproof lock
..................Bridging function
..................Grill function
.........Keep-warm levels 42°C/ 70°C/ 94°C
The corresponding cooking zone will be selected
when the power setting display is touched. The
stand-by dot of the cooking zone selected will light
up.
Symbols
.................. Timer function, automatic switch-off device
..................Locking
Lock key
(8)
The lock key can be used to lock all of the keys.
Keep-warm key (9)
For melting, holding and simmering
Power boost in the sensor fi eld
The power boost setting makes additional power
available for induction cooking zones.
Stop key (10)
The STOP function can be used to briefl y stop the
cooking process.
Recall function (10) (recovery function)
The most recent setting can be recovered if the hob is
switched off unintentionally.
Grill key
(14)
Grill function with a griddle plate for induction
3.2 Worth knowing about the slider (sensorfi eld)
In principle, the slider functions the same as the touch
controls; the only diff erence is that you can put your
fi nger on the glass ceramic surface and then move it
around. The sensor fi eld recognises this movement and
raises or lowers the display setting (cooking level) in
accordance with the movement.
The term sensor fi eld is used to mean slider from now on.
1 2 3 4 5 6 7 8 9 P
What must be observed when operating sensor
fi elds?
Your fi nger should not be placed fl at onto the glass
ceramic surface in order to avoid adjacent keys/sensor
fi elds from reacting by mistake.
Press the sensor fi eld lightly or move your fi nger
around
You can press the sensor fi eld very lightly with your
fi nger; when this is done the setting on the display
(cooking level) will gradually change.
When you put your fi nger on the sensor fi eld and then
move it to the left or right, the display setting will change
progressively.
The faster the movement, the faster the change in the
display.
1 2 3 4 5 6 7 8 9 P
1 2 3 4 5 6 7 8 9 P
Sensor fi eld
unsuitable right
touch move
Bekijk gratis de handleiding van FORS IKT 804 S FB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | FORS |
| Model | IKT 804 S FB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9746 MB |
