Handleiding
Je bekijkt pagina 28 van 80
Operation
28
GB
4.3 Operating the keys
The controls described here expect the pressing of a
(selection) key to be followed by the pressing of a subse-
quent key.
The next key will need to be pressed within 10 seconds,
otherwise the selection will be deleted.
4.4 Switching on the hob and cooking zones
1. Press the ON/OFF key (approx. 1 sec.) until the
power setting 0 appears and a short signal will sound.
The stand-by dots will blink. The controls are ready for
operation.
2. Use the Power setting display (as a key) to select a
cooking zone. The stand-by dot of the cooking zone
selected will light up.
3. The touch control
must be activated immedi-
ately afterwards. A power setting will be switched on.
..........left ............. power setting 0
..........center ........ power setting 5
..........right ........... power setting 9
See the section on Worth knowing about the slider
(sensor fi eld)
Press the respective sensor fi eld
to change
a power setting or to switch on an additional cooking
zone.
Important: the stand-by dot of the cooking zone selec-
ted must light up.
4. Put a cooking pot onto the cooking zone.
4.5 Switching off a cooking zone
5. Use the power setting display (as a key) to select a
cooking zone. The stand-by dot of the cooking zone
selected must light up.
6. a) Press the sensor fi eld on the far left or
b) drag your fi nger to the left across the touch control
to reduce the power setting to 0
c) press the ON/OFF key . The entire hob will be
switched off (all the cooking zones are switched off ).
4.6 Switching off the hob
7. Press the ON/OFF key . The hob will be completely
switched off , irrespective of any settings.
Please note:
The hob will switch off automatically after 10 seconds
when all the cooking zones are switched of manually (pow-
er setting 0) and no key/sensor fi eld is pressed afterwards.
lits
Stand-by dot
Bekijk gratis de handleiding van FORS HCN 6042 FB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | FORS |
| Model | HCN 6042 FB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 8642 MB |
