Fluke TiS20+ MAX handleiding
Handleiding
Je bekijkt pagina 19 van 38
Thermal Imager
Palette Menu
15
Marker
Use a fixed-temperature spot marker to show the temperature at the point before you save an
image.
To set a marker, select m > Markers > On. The marker (+) shows on the display.
To change the position of the marker:
1. Drag the marker or push W / X / Y / Z to move the marker on the image.
2. Push s to set the change and exit the menu.
Spot Box
Use the Spot Box feature to set a temperature measurement zone (box) to center on the target
and to adjust the sizes or position of the box. The box expands or contracts to different levels
within the infrared image. The box shows an approximate maximum (MAX), average (AVG),
and minimum (MIN) temperature measurement in that area.
Note
When you use Spot Box, the level and span of the Imager adjusts to the thermal
scene within the spot box.
To set a spot box, select m > Spot Box > On.
A white box shows on the display. a toggles between Size and Position.
To change the size and position of a box:
1. If necessary, push a to select Size.
; shows on the display.
2. Drag to increase or decrease the size of the Spot Box.
Or,
Push:
• W to decrease the vertical size.
• X to increase the vertical size.
• Y to decrease the horizontal size.
• Z to increase the horizontal size.
Bekijk gratis de handleiding van Fluke TiS20+ MAX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fluke |
| Model | TiS20+ MAX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3640 MB |
