Fluke FiberInspector FI2-7300 handleiding

Niet gecategoriseerd

Fluke

29 pagina's

PDF beschikbaar

Handleiding

Set the Key Position

You can attach the MPO inspection tips to the probe with the MPO

key on the left or right, as shown in Figure 6. This lets you rotate

the probe when a cabinet door or other surface is in the way of the

probe’s handle (Figure 7).

The Key Position setting at the bottom of the Live View screen lets

you make the fiber numbers on endface diagrams agree with the

numbers on the connector.

To see the correct numbers for the bers in your test results

• For key up/key down adapters: Set the Key Position to the key

position you use on the probe.

• For key up/key up adapters: Set the Key Position to the

opposite side from the key position you use on the probe.

When you set the Key Position correctly for the type of adapter,

fiber number 1 is in the upper-right corner of the endface image.

CL06.EPS

Figure 6. Left and Right Key Positions for the MPO Inspection Tip

MPO key

Key Left Key Right

MPO key

Bekijk gratis de handleiding van Fluke FiberInspector FI2-7300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.