Fluke FiberInspector FI-3000 handleiding
Handleiding
Je bekijkt pagina 11 van 29
9
Connect the Probe to Your Mobile Device
See Figure 4.
1. Hold down for 2 seconds to turn the probe on.
2. Open the Fi-In app on your mobile device.
3. On the Live View screen, tap the Wi-Fi button.
4. In the list of Wi-Fi hotspots, tap “FI-3000_xxxxxxxx”, where
“xxxxxxxx” is the serial number of the probe.
5. Enter the probe’s password: 1234567890.
6. When the probe is connected, the probe’s SSID shows in green
text on the Wi-Fi button.
If the mobile device disconnects from the probe, tap the Wi-Fi
button to reconnect.
Note
The password is the same (1234567890) for all
probes. You cannot change the password.
If your mobile device shows a message about no
internet access, choose to stay connected to the
probe.
If your mobile device has a VPN connection, you
must disconnect it before the device can connect to
the probe.
Some mobile devices disconnect from the probe if
you do not use the probe for several minutes.
Bekijk gratis de handleiding van Fluke FiberInspector FI-3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fluke |
| Model | FiberInspector FI-3000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2721 MB |
