Flir Scout TKx handleiding
Handleiding
Je bekijkt pagina 14 van 16
14
USER MANUAL # 4204190 - Rev 4
FLIR
SCOUT TKx
Notication screen of a successful load and pending
restart to nish software update
Loading bar progression in Scout TKx eyepiece
9) It will take approximately 5 minutes for the software to load. The
camera will restart when the process is complete
5.2 BATTERY SERVICE AND REPLACEMENT
If the battery will not hold a charge and requires
replacement, please contact FLIR Systems for details on
returning the unit for service. For instructions on charging
the battery refer to Section 2.3 Charging the Camera.
5.3 CLEANING THE Scout TKx
Wipe the housing with a damp cloth as needed. Use a high-
quality lens wipe to remove dirt or smudges from the lens
and display window. Do not use abrasives or solvents to
clean the housing, lens, or display window.
5.4 OVER TEMPERATURE PROTECTION
The camera has built in over temperature protection
to prevent damage to the electronics. When an over
temperature condition is detected, the image below is
displayed for ten seconds before the Scout TKx shuts down.
After a thermal shutdown, the Scout TKx will not turn on
until the camera’s interior has returned to a safe operating
temperature.
Excessive Temperature warning
Bekijk gratis de handleiding van Flir Scout TKx, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Flir |
| Model | Scout TKx |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5179 MB |
