Flir Meridian 9.2 handleiding
Handleiding
Je bekijkt pagina 50 van 97
46November 2022
Cameras Screens
Horizon/Meridian Admin Center Help File
When you enter the Copy Configuration dialog box, the selected camera in the Camera
settings screen will appear as the Source. You can select a different Source from the drop-
down list of cameras.
The list of Stream Settings parameters (Resolution, Frame Rate, and Quality), and
Recording Mode shows those parameters that will be copied from the source camera.
The parameters making up the list will vary according to the vendor/model of camera
selected, and the values for those parameters as set in the source camera will be shown.
Check whether to copy the Stream Settings parameters and/or the Recording Mode
setting. If you do not select a parameter, then the Destination cameras' default value for that
parameter will be used.
Destination
The Destination field lists all the attached cameras that are capable of using the selected
source parameters.
All / Search Filter - The All check-box allows you to select all the listed cameras.
Otherwise you can check just those cameras that you want to use the selected camera's
parameters.
Entering text in the Search Filter will reduce the list of available cameras and show only
those possible Destination cameras whose Names have text that corresponds to the text
entered.
Note when dealing with cameras that may have their Dual Stream capability enabled.
When copying parameters from a source camera that only has one stream running, the destination cameras
will have their second stream disabled by the Copy action.
When copying parameters from a source camera that has two streams running, the destination cameras will
have their second stream enabled by the Copy action.
Click OK to apply the chosen settings to all the selected cameras.
6.2.3 List of possible Camera States
Status - Camera status in the table can be shown as one of the following:
IP Fixed
Camera
IP PTZ
Description
Connected
Recording
Disconnected
Recording failed
Encoder
& Camera
Encoder
& Camera
Description
Has warning (connection from camera to encoder is lost)
Bekijk gratis de handleiding van Flir Meridian 9.2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Flir |
| Model | Meridian 9.2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12565 MB |
