Flex PP 40 12 handleiding
Handleiding
Je bekijkt pagina 16 van 257
PP 40 12/PP 110 18-EC
16
Intended use includes compliance with the
inspection and maintenance conditions.
Safety instructions
WARNING!
Read all safety warnings, instructions,
illustrations, ans specifications provided
with this power tool. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
Risk of injury from flying fragments
WARNING!
In the event of incorrect application or use of
worn or damaged pressing tools and
pressing devices, there is a risk of injury
from flying fragments.
Pressing tools and pressing devices
may only be used by a specialist.
It is essential for maintenance to be
performed and maintenance intervals
to be complied with.
Check the pressing tools and pressing
devices for cracks and other signs of
wear before each use.
Immediately discard pressing tools and
pressing devices with material cracks
or other signs of wear, and do not
continue to use them.
Only use pressing tools and pressing
devices that are in perfect working
order.
Do not continue to use the pressing
tool and pressing device after incorrect
application, and have them checked by
an authorised repair shop.
Do not continue to use worn pressing
tools, but rather replace them
immediately.
Use a carrying case for transport and
storage, and keep the pressing tools
and the pressing device in a dry room.
Have any damage checked
immediately at an authorised repair
shop.
Observe the safety instructions for the
cleaning agents and anti-corrosion
agents used.
Use only original batteries with the
voltage indicated on the identification
plate of your power tool. The use of
other batteries, e.g. imitations,
reconditioned batteries or other makes,
means that there is a risk of injury and
material damage due to exploding
batteries.
Safety instructions for handling
batteries
Do not open the battery. Risk of a short
circuit.
Protect the battery against heat,
including prolonged sunshine, and
against fire, water and moisture. Risk
of explosion.
A damaged or incorrectly used battery
may result in the emission of fumes.
Ensure a supply of fresh air and consult a
doctor if you feel unwell. The fumes may
irritate the respiratory tracts.
Liquid may leak out of the battery if
the battery is used incorrectly. Avoid
contact with such liquid. In the event
of accidental contact, rinse with
water. If liquid gets into the eyes, seek
medical attention as well. Liquid
ejected from the battery may cause
irritation or burns.
Use FLEX rechargeable batteries only
in conjunction with FLEX tools and
FLEX accessories. Only in this way is the
rechargeable battery protected against
dangerous overloads.
Recharge batteries using only chargers
recommended by the manufacturer.
A
charger that is suitable for one type of
battery may create a fire hazard if used
with another battery.
The battery could be damaged by
pointed objects such as nails or
screwdrivers, or by force exerted on it
externally.
This may give rise to an
internal short circuit, causing the battery to
burn, smoke, explode or overheat.
Bekijk gratis de handleiding van Flex PP 40 12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Flex |
| Model | PP 40 12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24956 MB |
