Flex MWL 150 4 handleiding

110 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 8 van 110
MWL 150 4
8
Safety instructions for handling
batteries
Do not open the battery. Short-circuiting
hazard!
Protect the battery against heat,
including prolonged sunshine, fire, water
and moisture. Explosion hazard!
A damaged or incorrectly used battery may
result in the emission of fumes.
Ensure a supply of fresh air and consult
a doctor in the event of any physical
complications. The fumes may irritate the
respiratory tracts.
Liquid may leak out of the battery if the
battery is incorrectly used. Avoid contact
with such liquid. If contact accidentally
occurs, rinse with water. If liquid contacts
eyes, seek medical attention.
Liquid discharged from the battery may
cause irritation or burns.
Use FLEX rechargeable batteries only in
connection with FLEX tools and FLEX
accessories.
Only in this way is the
rechargeable battery protected against
dangerous overloads.
Recharge batteries only with chargers
recommended by the manufacturer.
A charger that is suitable for one type of
battery may create a fire hazard when used
with another battery.
The battery may be damaged by pointed
objects such as e.g. nails or screwdrivers or
by external application of force.
This may
give rise to an internal short circuit, causing
the battery to burn, smoke, explode or
overheat.
The light source contained in this LED
rechargeable lamp must only be replaced
by the manufacturer or its customer service
or a similarly qualified person.
Do not look directly into the light as this will
cause glare.
Never use the LED rechargeable lamp in
the vicinity of naked flames.
The red LED indicates that the
rechargeable battery is being charged.
The green charging indicator will light up
when charging is complete.
Charge the LED rechargeable lamp
frequently.
Do not store the LED rechargeable lamp
with the battery drained as this may
destroy the battery.
The light source of this LED rechargeable
lamp cannot be replaced; if the light source
is defective or has reached the end of its
service life, the entire LED rechargeable
lamp must be replaced.
Only charge the LED rechargeable lamp
indoors from a minimum temperature of
C.
Technical specifications
MWL 150 4
Equipment model
LED rechargeable
lamp
Lithium-ion battery V/mAh 3,7/800
Runtime h ~ 1,75 -3,5
Charging time h 2,5
Colour
temperature
K 2500-6500
Total luminous flux lm
75/150
Spot: 75
Light beam range m 42
Permitted ambient
temperature
- Operation:
- Storage:
°C
-10 - 40
< 50
Size (LxWxH) mm 95x21x26,5
Protection class IP20/IK07

Bekijk gratis de handleiding van Flex MWL 150 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkFlex
ModelMWL 150 4
CategorieNiet gecategoriseerd
TaalNederlands
Grootte12377 MB