Flex BME 14-3 L handleiding
Handleiding
Je bekijkt pagina 27 van 368
TRINOXFLEX
27
Preselecting the speed
The adjusting wheel enables the operating
speed to be continuously adapted to the
material requirements.
Maintenance and care
WARNING!
Before performing any work on the electric
power tool, pull out the mains plug.
Cleaning
WARNING!
If metals are ground or cut over a prolonged
period, conductive dust may become
deposited inside the housing. Impairment of
the protective insulation! Operate the power
tool via a residual-current-operated circuit-
breaker (tripping current 30 mA).
Regularly clean the power tool and ventila-
tion slots. Frequency of cleaning is depen-
dent on the material and duration of use.
Regularly blow out the housing interior and
motor with dry compressed air.
Cleaning dust cap
Clean gauze of air slot preliminarily with a
brush.
Then blow out to one side using
compressed air.
In the event of heavy soiling, unclip the
cap, remove it and blow out completely
with compressed air.
Carbon brushes
The drive unit is fitted with cut-off carbon
brushes. When the cut-off carbon brushes
reach their wear limit, the power tool switches
off automatically.
NOTE
Use only original parts supplied by the
manufacturer for replacement purposes.
If non-original parts are used, the guarantee
obligations of the manufacturer will be
deemed null and void.
When the power tool is being used, the car-
bon brushes can be seen sparking through
the rear air inlet apertures. If the carbon
brushes are sparking excessively, switch off
the power tool immediately. Take the drive
unit to a customer service centre authorised
by the manufacturer.
Setting
Speed burnishing
attachment
[r.p.m.]
Belt speed belt
sander attachment
[m/s]
1 1000 3,5
2 1500 4,8
3 2000 6,1
4 2500 7,4
5 3000 8,7
6 3500 10,0
Bekijk gratis de handleiding van Flex BME 14-3 L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Flex |
| Model | BME 14-3 L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 80467 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Red |
| Gewicht | 2100 g |
| Breedte | 100 mm |
| Snoerlengte | 4 m |
| Stroombron | AC |
