Flex BME 14-3 L handleiding
Handleiding
Je bekijkt pagina 25 van 368
TRINOXFLEX
25
To release the air at the back of the valve
cap, open the valve.
NOTE
If the grain of the sanding sleeve has to be
changed very frequently, we recommend
using a second rubber air roll from the
accessories range.
Work instructions for the burnishing
attachment
CAUTION!
When the appliance is switched off, the
grinding tool continues running briefly.
Machining flat areas:
Hold electric power tool with both hands.
To give the surface a decorative finish:
Carefully place the electric power tool on
the area to be machined and move the
power tool forwards and backwards in
a linear motion.
Connecting an extraction system
NOTE
It is recommended to use a FLEX Class M
dust extractor.
Attach extraction hose to the connector on
the guard hood.
Attach power cord to the extraction hose
using the enclosed cable holders (3x).
Connect extraction hose to the dust
extraction system. Follow the operating
instructions for the dust extraction system!
Check the attachment! If required, use an
appropriate adapter.
NOTE
If your dust extractor requires a special
connection (i.e. a connection other than the
32 mm/36 mm standard connection which is
included with the electric power tool),
contact your dust extractor supplier to
obtain the appropriate adapter.
Belt sander attachment
BRE 14-3125
WARNING!
Before performing any work on the electric
power tool, pull out the mains plug.
Attaching or changing the sanding belt
CAUTION!
Observe the specified running direction of
the belt! Running direction must correspond
with the arrow on the gear head.
Pull out the mains plug.
Press the swing arm towards the rubber
drive roller and hold down
Place the sanding belt over the rollers.
Release the swing arm.
Check that the belt is situated fully on the
rollers.
Adjusting the handle
When working in areas which are difficult to
access, e.g. handrails attached to walls, the
handle can be attached to the other side of
the swing arm.
Bekijk gratis de handleiding van Flex BME 14-3 L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Flex |
| Model | BME 14-3 L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 80467 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Red |
| Gewicht | 2100 g |
| Breedte | 100 mm |
| Snoerlengte | 4 m |
| Stroombron | AC |
