Flama 2052FL handleiding
Handleiding
Je bekijkt pagina 15 van 28
13English
You can adjust the power of the blender using the power regulator.
If you wish to achieve maximum power immediately without using
the power regulator, press the TURBO buon.
Aer use, disconnect the blender from the power outlet and turn
the foot to the le to detach it.
IMPORTANT - Remove the container where you intend to use the
blender from any heat source while chopping food.
IMPORTANT
Never use the blender with the foot poorly aached, as it may
cause serious damage.
If the blender does not work, it may be because the foot is
not properly aached to the body. Try removing the foot and
reaaching it.
If the blender gets too hot, it indicates that it has been used
connuously for too long. Stop for a few minutes.
Chopper Accessory
The maximum operaon duraon must not exceed 30 seconds, and
there should be a 3-minute rest between two consecuve cycles.
Aer 5 cycles, a 20-minute rest period is required.
- Place the chopper bowl on a clean, level surface.
- Assemble the blade in the bowl.
- Place the food in the bowl.
Note: remove bones from the meat, cut it into small pieces, and
place it in the bowl. The maximum amount of meat must not
exceed 200 g per batch.
- Place the lid on the bowl, ensuring that the inner part aligns with
the groove of the lid. Then, press the lid down and turn it unl it
locks. To remove the lid, turn in the opposite direcon.
- Insert the body of the blender into the lid and turn unl it locks.
- Plug the blender into the electrical outlet.
- Press the ON buon to turn on and simultaneously adjust the
power regulator to the desired power.
- To stop, release the ON buon.
Bekijk gratis de handleiding van Flama 2052FL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Flama |
| Model | 2052FL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3230 MB |
