Fisher Paykel WA8060P handleiding
Handleiding
Je bekijkt pagina 41 van 48
39
TROUBLESHOOTING
Solving operating problems
PROBLEM POSSIBLE CAUSES WHAT TO DO
Washer is
continually going
out of balance.
Washer may not be level. Check the washer is level and does
not rock in any direction. Refer to
page9.
Too much water for the load Ensure an appropriate water level is
selected for the load size (or select
‘Auto’ water level).
Refer to page31 to change the out
of balance recovery mode.
Too much or too
little water when
filling on auto
water level.
The washer needs to
determine the correct water
level for the load.
Refer to the ‘Wash options’ section
for more information.
Some loads do not
suit ‘Auto’ water level,
egpillows.
Manually select the most
appropriate water level for the load.
Washer is making
noises.
Banging.
Load is out of balance. Press
and
redistribute the load.
Other noises. Refer to the ‘Caring for your washer’
section.
Small puddle
coming from
under the washer.
The water level is too high
for the amount of clothes
and has caused excessive
splashing.
Select a lower water level. Refer to
page22 for more information.
Large bulky garments
(egpillows, duvet) can
cause splashing.
Wash on the ‘Bulky’ cycle. Refer to
page26.
Bekijk gratis de handleiding van Fisher Paykel WA8060P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fisher Paykel |
| Model | WA8060P |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3818 MB |
