Fisher Paykel JZT-CI302DTB2 handleiding
Handleiding
Je bekijkt pagina 30 van 42
28
USING YOUR COOKTOP’S SPECIAL FEATURES
If no pan is detected on one half of the bridged cooking zone:
Initially the left hand display will still show the selected temperature and the right hand
display will still show .
If after 10 minutes there is still no pan detected:
●
the bridging function will switch off.
●
the cooking zone without a detectable pan will turn off.
●
the remaining cooking zone will continue cooking at the selected heat setting.
Using Auto Rapid Heat in bridged mode
1 Bridge the cooking zones by touching both setting slectors (anywhere) simultaneously.
2 Using the left hand setting selector, select the heat setting.
3 Hold your finger on the control at the selected heat setting until A flashes alternately
with the selected setting.
To cancel bridging
At the same time, touch the setting selectors of both bridged cooking zones.
The bridging indicator lights will go out.
Note: Sliding the scale down to 0 will not turn off bridging.
Note: Cancelling bridging will also cancel the timer for those cooking zones.
Using the timer in bridged mode:
You may only set one timer for the bridged cooking zone. See ‘Setting the timer’.
The timer indicator will show in both displays.
Bekijk gratis de handleiding van Fisher Paykel JZT-CI302DTB2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fisher Paykel |
| Model | JZT-CI302DTB2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2717 MB |
