Fisher Paykel JZT-CI302DTB2 handleiding
Handleiding
Je bekijkt pagina 22 van 42
20
USING YOUR COOKTOP’S SPECIAL FEATURES
When Auto Rapid Heat is set
●
The amount of time the cooking zone will rapidly heat for depends on the heat setting
you have selected. See below chart for rapid heat times.
●
If you would like a lower or higher heat setting than you originally selected, simply slide
to the new setting and hold until the A starts flashing. Alternatively, wait until A stops
flashing and then modify the heat setting.
To quit the Auto Rapid Heat setting while A is flashing
Either touch or slide the setting selector to a new setting or to 0 to turn the cooking
zone off.
Note:
●
The Auto Rapid Heat and PowerBoost features cannot be used together. If you turn
PowerBoost on when Auto Rapid Heat is already set, the Auto Rapid Heat will cancel
and PowerBoost will stay on.
When the rapid heating is finished,
A
will stop flashing and the temperature
will automatically reduce to the heat
setting you have selected.
SELECTED HEAT SETTING APPROXIMATE TIME AT RAPID HEAT
1 40 seconds
2 1 minute
3 2 minutes
4 3 minutes
5 4 minutes
6 7 minutes
7 2 minutes
8 3 minutes
While the cooking zone is rapidly
heating, A will flash alternately with
the heat setting you have selected.
Bekijk gratis de handleiding van Fisher Paykel JZT-CI302DTB2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fisher Paykel |
| Model | JZT-CI302DTB2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2717 MB |
